VAS1260——60V/1.2A LED Driver with Internal Switch
General Description
The VAS1260 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 5V and 60V, and provides an externally adjustable output current of up to 1.2A.
The VAS1260 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current. Output current can be
adjusted below the set value, by applying an external control signal to the ‘ADJ’ pin.
The device operates over the -40°C to +85°C temperature range and is available in SOT89-5 package.
Application
Architectural, Industrial, Ambient and Car Lighting
LED MR16, MR111
PAR and other LED Bulbs
Features
Simple low parts count
Internal 60V NMOS switch
1.2A output current
PWM dimming
High efficiency (up to 97%)
Wide input voltage range: 5V to 60V
Over Temperature protection
Up to 1MHz switching frequency
Inherent open-circuit LED protection
Typical 5% output current accuracy